6
USK KS 1 - 060104
C
Insert the vacuum cleaner on the bracket with
its handle facing down (a hook at the back of
the appliance allows you to attach it easily to
the bracket) (see picture C). Make sure the
"jack" plug enters the appliance in the
opening foreseen in the back of the
appliance. Insert the plug of the charger into a
120V wall socket. The charging indicator will
come on, indicating that the vacuum cleaner
is positioned correctly on the bracket and that
the charging process will start. The charging
indicator will stay illuminated even if the
battery is fully charged.
You can leave your appliance on the bracket
for a long time without any risk of deterioration.
Do not charge the battery if the room temperature falls below 0°C or
rises to more than 37°C.
The charger will warm up during use. This is perfectly normal. It will
cool down as soon as the charging process is over.
USE
Once your appliance is charged, remove it from the bracket by
holding it by its handle. Switch it on by sliding the ON/OFF switch
forward. Tilt the vacuum cleaner till the nozzle of the dust collector is
placed horizontally compared to the surface that is to be cleaned.
When you are finished, slide the ON/OFF switch backward to switch
off the appliance.
Practical hint: your appliance is equipped with a small crevice tool,
which also serves as a base for several attachments. You can also
use this crevice tool to avoid scratching the nozzle of the dust
compartment.
To clean surfaces that are difficult to reach, use one of the crevice
tools supplied. Caution: the large crevice tool cannot be attached
directly to the appliance, but must first be fitted to the small crevice
tool, that can then be attached to the appliance. To clean flat
damp surfaces, use the squeegee directly mounted on the dust
