7
www.KALORIK.com
EPCK 44847 - 180330
PARTS FUNCTION
Steam release knob:
Should be set to the
‘
Pressure
’
position before
using the unit, for the cooker to build pressure.
Set to the ‘
Release
’
position to release the
pressure manually or to cook without pressure.
Removable cooking
pot:
4L/4.2qt capacity non-stick coated
removable pot, provides even heat
distribution.
Silicon gasket:
Creates the air-tight seal needed for the
pressure cooker.
Gasket holding ring:
Holds up the silicon gasket.
Dew collector
Collects any condensation on the lid or the
sides of the pressure cooker
Control panel functions
:
There are 8 presets in addition to a Delay time and a DIY setting. More
details about each preset are presented in the Settings table.
BEFORE THE FIRST USE
•
Remove all packing materials and literature.
•
To remove the lid, hold the handle, turn in a clockwise direction,
and lift off.
•
Wash all removable parts and accessories in warm, soapy water.
Rinse and dry all parts thoroughly.
•
Wipe the outer housing with a clean damp cloth.
•
Make sure the silicon gasket is properly fitted on the gasket holding
ring.
•
Place the gasket holding ring into the underside of the lid. It will only
fit in one way.
