6
USK CM 25282 - 080331
•
Wait until the brewing process is finished and the filter is empty
before removing the jug.
•
Practical hints: When the water tank is empty, wait a few more
minutes, as some water might still drip out of the filter before
removing the jug.
PROGRAMMING THE COFFEE MAKER
To program your coffee maker to brew fresh coffee at a preset time,
first follow steps 1 to 4 in the “PREPARATION OF COFFEE” section.
Make sure the coffee maker’s clock is set to the right time.
Press the PROGRAM button twice. The clock will now display 12:00
with the word “TIMER” in the upper left corner. Use te HOUR and
MINUTE buttons to set the desired brew time.
Press the START/STOP button twice to activate the preset brew cycle.
The green AUTO light will illuminate when the brew time is properly
set.
When your preset brew time is reached and the coffee maker starts
its brew cycle, the green AUTO light will go out and the red ON light
will illuminate.
As with the regular brew cycle, an automatic two hour keepwarm
cycle will commence after your coffee maker has finished brewing.
At the end of the two hours, the coffee maker will automatically shut
itself off.
