background image

91

EN

Check every 7 days

Lower ash drawer cleaning 

Clean bottom ash from the fallen debris during operation. 
You can access the ash pan by loosening the two wing nuts 
that hold the drawer inspection. Remove the tray, empty and 
clean the wall and only the corners with a suction device or 
with dedicated tooling. Then mount the drawer and tighten 
the two knobs being careful to restore the tightness, very 
important during operation.

Check every 60/90 days
(Only for Thermostove 20/24)

Cleaning the interior baffle / smoke fan compartment

Inside the compartment where there is the ash tray, there is 
a second cover, fixed by the cockerels, which gives access to 
the compartment at the base of the duct dedicated to the 
flue and the wall of the fume extractor fan. Use a suction 
device for thorough cleaning of the cabinet. Check the 
integrity of the seal in ceramic fiber.

Cleaning the interior baffle / smoke fan
compartment. (Only for Thermostove 28/32)

Remove the right side of the Stove. Now the tube for the air 
aspiration is visible. In the lower part there is a plate; remove 
this plate to access to the fumes compartment. Use an ash-
aspirator to remove the residues in the flue gas compartment 
and carefully clean the part on your left that gives access to 
the final part of the vertical pipe heat exchanger.

Summary of Contents for Ada 28B























































Reviews: