10. Complete the Finished Wall/Deck
If you have not already done so, carefully remove the protective tape from the whirlpool rim.
Cover the framing with water-resistant wall/deck material. Seal the joints between the whirlpool
rim edge and the water-resistant wall/deck material with silicone sealant.
Tape and mud the water-resistant wall/deck material. Install the finished wall/deck to the
water-resistant wall/deck material. Seal the joints between the whirlpool rim and the finished
wall/deck material with silicone sealant.
Install the faucet trim according to the instructions packed with the trim.
11. Complete the Concrete Installation
If you have not already done so, carefully remove the protective tape from the whirlpool rim.
Apply mortar and tile to the wall, deck, and surround material as needed.
Apply a bead of sealant where the tile meets the whirlpool surface.
Install the faucet trim according to the instructions packed with the trim.
12. Clean-Up After Installation
When cleaning up after installation,
do not use abrasive cleansers
, as they may scratch and dull the
whirlpool surface. If necessary, use warm water and a liquid detergent to clean the surface of the
whirlpool, user keypad, and remote control.
Remove stubborn stains, paint, or tar with turpentine or paint thinner.
Do not allow cleaners
containing petroleum distillates to remain in contact with any whirlpool surfaces for long periods
of time.
Remove plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire
brushes, or other metal tools. Use a powder-type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
Wall
Material
Whirlpool
Apply
sealant.
Finished
Deck
Apply
sealant.
Water-Resistant
Deck
Framing
Apply
sealant.
Finished
Wall
Water-Resistant
Wall
Tiling-In
Bead
Alcove
Drop-In
Concrete
Framing
Kallista
11
1019455-2-E
