INSTALLATION INSTRUCTIONS
Whirlpool and Bath Undermount Kit
1096757_2_B
Page 4 of 4
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL THe COUNTeR
2.
Inside Well
Edge
Apply silicone
sealant.
Weights
Apply silicone
sealant or caulk.
CAUTION: Risk of property damage.
Do not use adhesive sealant to secure the counter material to the
bath. Adhesive sealant will permanently bond the counter material to the bath making separation difficult
and costly. Instead, use silicone sealant or caulk which will ease future maintenance or removal of the
counter material.
Clean the bath rim.
NOTICe:
The bead of silicone sealant must be placed a minimum of 2” away from the inside well edge of the
bath rim.
Apply a continuous bead of silicone sealant to all areas where the bath rim and counter material meet.
Align and properly position the counter material over the bath.
Press the counter firmly onto the bath.
Temporarily set weights on the counter material. This will hold the counter material in place while the
silicone sealant dries.
Apply a continuous bead of silicone sealant where the bath rim and the counter material meet.
