Integral Supply Stop Operation
NOTE:
Use a socket wrench with 1/2
″
(13 mm) socket to adjust the
stops.
Turn Off the Stops
Use a socket wrench to turn the integral stops 90°
counterclockwise to close both the hot and cold water inlet
supplies.
NOTE:
If the inner body turns, but the outer ring does not turn,
firmly tighten (clockwise) the integral stop. Then rotate
counterclockwise. The outer ring should then turn with the integral
stop.
NOTE:
If the outer ring still does not turn, slide the locking bar up
by loosening the screw. Free the integral stops by turning them
clockwise and then turn them back to their original position. Slide
the locking bar back in place and secure with the screw.
Confirm the stops are closed using the diagram above.
Turn the volume control counterclockwise to release excess water
(not shown).
Turn integral supply stops 90˚
for OPEN/CLOSE.
Integral
Supply Stops
Supplies Closed
Supplies Open
Locking Bar
1170591-5-A
4
Kallista
Summary of Contents for P29511
Page 23: ...Entretien des filtres cont R installer la garniture Kallista Fran ais 6 1170591 5 A...
Page 40: ...Servicio de los filtros cont Vuelva a instalar la guarnici n 1170591 5 A Espa ol 6 Kallista...
Page 52: ...USA Canada 1 888 4 KALLISTA Fax 1 888 272 3094 kallista com 2011 KALLISTA 1170591 5 A...
