INSTALLATION INSTRUCTIONS
Deck-Mounted Bath Set with Diverter
1242694-2-A
5 of 6
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
3. INSTALL THE HANDLES
Spline Adapter
Screw
Setscrew
Handle Assembly
Washer
Handle Adapter
Setscrew
Valve Collar
NOTE: The lever handles should be perpendicular with the spout when in the closed position.
Install the valve collar over the valve and into the fi nished deck.
Place a spline adapter onto the valve. Make sure the valve is in the “OFF” position.
Place the handle assembly over the spline adapter, and check the alignment. Remove and reposition the
handle if necessary, until it is perpendicular with the spout.
Remove the handle assembly and securely tighten the spline adapter with the screw.
Apply a bead of plumbers putty or other suitable sealant around the bottom of the handle adapter.
Place the handle adapter over the valve assembly.
Secure the handle adapter by tightening the two setscrews.
Place the washer onto the handle adapter.
Install the handle assembly over the spline and check alignment. Press the handle assembly into place.
Remove any excess plumbers putty or sealant.
