INSTALLATION INSTRUCTIONS
Cable Drain & Cable Drain Trim Kit
1096756_2_A
2 of 6
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
THANK YOU FOR CHOOSING KALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual be-
fore you install your Kallista product. If you encounter any installation or performance problems, please do not
hesitate to contact us at the phone number listed at the bottom of the page.
TOOLS
Plumbers
Putty
Adjustable
Wrench
Level
P-Trap
Spanner
(supplied)
Hex Wrench
(supplied)
Caulk
Gun
Tape
Measure
Silicone
Sealant
Keyhole or Saber Saw
Hacksaw
BeFORe YOU BeGIN
CAUTION: Risk of product damage.
Do not kink or cause damage to the cable during installation.
Observe all local plumbing and building codes.
Turn off the main water supplies.
Refer to the roughing-in dimensions of your bath to properly install this product.
Carefully inspect the fittings for damage before installing.
If you are installing a new bath, install the drain before installing the bath.
Kallista reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
