Kalley K-LED43FHDST2, Service Manual

Page: 19 / 41

11 / 13
6).Repeat step 2
—
5 until both of the value of color coordination of
white and grey equal to (X=0.270 +/-0.015;Y=0.290 +/-0.015).
After the adjustment of HDMI1, you can switch to other source AV, PC
and YPbPr and repeat step 1
—
6 to do the WB adjustment.
Note: For some small size LED panel,the color coordination of
specifications is not X=0.270/Y=0.290,and we recommend you adopt the
values from panel specifications.
5.5. ADC Calibration and White Balance Adjustment (automatic)
The process of adjusting White Balance automatically is out of the
range of this file, Please refer to the relevant technical file of HuiZhou
factory of TCL.
6.Chip list of software programming before SMT
Following chips must be programmed before SMT by tools
Position Chip type Software description
U301
MT29F2G08ABAEA
HDMI HDCP Key, System Software etc.
7.Software update
Method of SW update:
1
）
Download the bin file to the root directory of your USB device (Do
not change the file name); Then insert the USB device to USB interface
of TV set.
MS08GPSeries with its upgrade file corresponding relation as thetable
below show:
Chassis Name
Sales
area
Upgrade filename Remark
MS08GP LA MS08GP_MAIN.bin DVB-T2
2
）
Appendix
 “How to upgrade SW
FLASH using Mstar
tool”
See Appendix
 “How to upgrade
MBOOT using USB
”
Appendix
 “How to
upgrade FLASH SW using USB
”

Copy the SW BIN image “
MS08GP_MBOOT.bin
” into USB stick root path
.
Note: If there’s already other “
MS08GP_MBOOT.bin
” into USB root, it needs to be deleted
or renamed.

Plug USB stick to the TV USB slot.

Press RCU MENU

Option

Software upgrade

By USB

Confirm.
Or, turn off the TV press and hold the power key of key board before reconnect AC