Kalley K-LED20HDT2, Service Manual

Page: 20 / 36

3
，
After updating , the set will reset automatically.
8, Project ID selecting
1) Press the Menu button of remote control, then select Contrast
item of Picture submenu; press 1,9,5,0 consecutively, there you
go the Design Menu.
2) Select the SERVICE MENU item, press OK and RIGHT button of the
remote to enter submenu,
3) Select the PROJECT ID item, press OK or RIGHT button of the
remote to enter the submenu;
4) Press the right or left button of the remote to select the ID you want;
5) After ID selection, press MENU button of the remote to exit
DESIGN MENU.
6) Finally, do AC power on/off.