20
if you want to set 18 credits (punches) for $10, you should
set P06 to 40-18. NOTE: SEE SETTING P65.
P07
THIS FUNCTION IS USED FOR TESTING OF THE SENSOR
(DIAGNOSTIC FUNCTION).
WHEN PUNCHING BAG IS IN THE VERTICAL POSITION -
THE DISPLAY SHOWS - "LO", WHEN PUNCHING BAG IS IN
THE HORIZONTAL POSITION - DISPLAY SHOWS "HI”.
P08
YOU CAN SET THE BEST SCORE WHICH WILL BE ON THE
DISPLAY FOR POWER MODE ONLY. PLAYERS WILL
NEVER BE ABLE TO RECEIVE A HIGHER SCORE (WHICH
MUST BE SET BETWEEN 900 AND 990). YOU CAN ADJUST
THIS VALUE BY USING “START” (UP) AND “SELECT
GAME” (DOWN) BUTTONS. AFTER YOU SET THE DESIRED
UNATTAINABLE POWER HIGHEST SCORE YOU MUST
TURN SWITCH # 5 TO “ON” POSITION.
IMPORTANT: AFTER YOU SET THE RECORD AND PUT
SWITCH #5 TO “ON” POSITION YOU MUST TURN OFF
THE MACHINE FOR 5 SECONDS.
P09
THIS FUNCTION IS USED FOR DIFFERENT SETTINGS OF
THE COIN ACCEPTOR, FOR EXAMPLE: 0-USA, 1-CANADA.
NOTE: IF THE BILL ACCEPTOR IS SET 4 PULSES FOR A
1$, SET P09 TO 12 (in case of the older software to 5).
P10
PARAMETER USED BY FACTORY. DEFAULT SETTING IS 0.
P11
HOPPER OUTPUT DEVICE SETTING
0 - OFF,
1 - TICKET DISPENSER,
2 - BALL DISPENSER,
3 - POWER ALWAYS ON (USED FOR THERMAL
PRINTERS).
NOTE: IN ORDER TO MANUALLY FEED THE TICKET
DISPENSER PRESS AND HOLD IN THE SAME TIME
SWITCH SW1 AND SW2.
DEFAULT SETTING IS 3.
