Kali Audio IN-UNF Users’ Guide
9
Inputs and Controls
Dip Switch Quick Reference Guide
Scan the QR code to open a reference guide that will help you set the dip switches to the
appropriate positions for your application. Also see pages 14-17 of this manual.
Dip Switches
The dip switches control Boundary EQ, bandpass trims, and the position of the system. A full
explanation of the operation of the dip switches can be found by scanning the QR code.
Volume Control
The volume control allows users to adjust the output of the speaker from -∞ (Muted) to +6
dB. There is a center detent at the +0 dB setting, and this is where Kali recommends you
leave the volume setting.
Optical Input
The optical input allows convenient connection to most televisions and other devices like
Blu-Ray players and gaming consoles.
USB Input
The USB Input allows you to connect to a computer or tablet without needing a separate au-
dio interface. Use with an Apple iPad will require a camera adapter kit, sold separately. Use
with certain smartphones may be possible, but is not supported.
3.5mm Input
The 3.5mm input allows convenient connection to a wide range of devices. In addition to de-
vices with 3.5mm outputs, adapters for other output unbalanced analog connectors are easy
to find.
TRS Inputs
The TRS inputs allow connection to professional audio devices, as well as high end receivers
with balanced outputs.
Satellite Outputs
The satellite outputs should be connected with the provided banana plugs to the satellite
speakers. They are color coded, so connect red to red and black to black. They are also la-
beled left and right. When connecting, “right” refers to your right when you’re at the listen-
ing position, facing the system. See the bottom of page 12 for more details.
Power Input - On/Off Switch
Plug the provided power cord into the power input.
Use the on/off switch to power the speaker on and off. Be sure to power the speaker off
when connecting or disconnecting the power cable, during lightning storms, or during
extended periods of disuse. Turning the power on and off externally, for instance via a wifi
power switch, will not harm the device.
Sleep Switch
Use the sleep switch to put the unit into standby for low power operation when not in use.
The LED will change to red. Hit the sleep switch again to bring the unit out of standby. Stand-
by will only engage automatically if the digital inputs are not connected. You will need to use
this switch if you wish to put the unit into standby while using the digital inputs.
