Kali Audio IN-UNF Users’ Guide
12
First Time Setup
Step 3: Use the printouts from the quickstart guide to
position your system on your desk.
Place the printouts under the front corners of the bass unit,
and then place the satellites in the marked position on the
printout. Carefully slide the printouts out when done, and
place them aside.
If you’ve lost your printouts, you can download new ones
from the Kali Audio website.
Step 4: Plug in the IN-UNF.
The banana plugs from each satellite connect to the left
side of the IN-UNF bass unit.
If the bass unit is horizontal, the right satellite goes on top,
and the negative (red) cable goes towards the back.
If the bass unit is vertical, the right satellite goes towards
the back, and the negative (red) cable goes on bottom.
Plug in whichever input you’re using, then plug in power
and turn the unit on.
First Time Setup
