Kali Audio MM-6 Users’ Guide
16
The MM-6’s enclosures are made of MDF wood and wrapped in vinyl, which is sensitive to heat and
humidity. The product should be kept and used in a climate-controlled environment. Exposure to
direct sunlight, moisture, or consistent humidity above 65% may cause the vinyl to peel and wrinkle.
This is not covered under warranty.
Climate Considerations
First Time Setup
The MM-6 is made for reference level listening up to about 2.5 meters, or 7.5 feet. When you’re set-
ting up your speakers, think about each speaker and yourself being corners in an equillateral triangle.
The speakers should be about as far apart from each other as each one is from you.
You’ll want to position the speakers so that the tweeters are more or less at ear level. If the speakers
are too high, you can turn them upside down, but you shouldn’t turn them on their side.
Once the speakers are in position, follow these steps to get them powered on and playing for the first
time:
1. Make sure that the power switch on the speakers is set to the OFF position.
2. Turn the volume control on the back of the speakers all the way down.
3. Plug the speakers into power.
4. Plug in your audio cables. Refer to pages 10 and 11 for more information about connecting
multiple speakers.
5. Turn on your audio source, whether its a television, a music player, or a gaming console.
Start playing music or other content.
6. Power on the speakers.
7. Slowly turn the volume on the speakers up to the center detente. If you hear distortion, turn
the speakers back down and check that all of your connections are tight.
8. Use the output volume on your device, or the MM-6’s included remote control to set the vol
ume to a comfortable level.
Enjoy your new speakers!
