5
Comment: If no signal is found after 10 seconds the unit will turn itself off.
Signal reception: If you change or reset your chest belt during a training session, it may be necessary to search for
the signal again.
To force a signal search: Press and hold the BUTTON for 4 seconds and release when unit is on.
NOTE: Signal interference present in the environment due to electromagnetic disturbances may cause unstable or inaccurate
heart rate readings. This is mostly due to proximity to high voltage power lines, traffic lights, overhead electric bus or tram
lines, televisions, motors, cars, some motor driven exercise equipment, mobile phones, computer screens, or when you walk
through electric security gates.
5. Recording data.
Every time the device receives a signal, it starts a new activity record and begins to store heart rate data.
The electro-luminescent diode will flash green every 3 seconds to indicate that data is being recorded.
As soon as the device stops recording data or is turned off, the activity record is ended.
To end an activity record / turn the device off:
1. Press and hold the BUTTON for 2 seconds. The diode will turn orange.
2. Release the BUTTON key to turn off the device.
Comment: The device will automatically turn itself off if no heart rate is detected in the space of 5 minutes. During this time the
green light will continue to flash. The device will also turn itself off if the battery is low or if the memory is full.
Memory: Recording capacity is 75 hours. Up to 99 activity records can be stored.
Signal from the diode
Meaning
Red flashes slowly during exercise
90% of memory full
RED steady for 2 seconds
Memory full, the unit will automatically turn off
Memory records can be deleted manually or by using the Geonaute Software supplied with this product. To delete
using your PC, please refer to the software notice.
To manually delete all activity records:
1. Press and hold BUTTON for 4 seconds (when unit is OFF). The diode will
flash orange.
2. Press again to clear memory.
3. The diode will turn green for 1 second to indicate records are deleted.
