LDM 500-80
+
ENGLISH
© KALEAS GmbH & Co. KG
37
Retrieving measured values from the buffer
The buffer allows quick access to a single memory value. The buffer
is ideally suited if you plan to use a value multiple times.
1x
short
Display [10]
1x
short
Display [4]
Value from buffer
The value is available for use in all functions.
Example
: You want to determine the volumes of several rooms with
the same ceiling height. Measure the room height once and store
the value to the buffer by pressing the [T2] button longer than 2
seconds. Then insert the value as the height when using the volume
function by pressing buttons [T2] and [T1] successively to retrieve
the value and apply it.
Retrieving measured values from the memory
2x
Display [10]
1x
short
Invoking the desired memory address
n
Display [11] 1…99
Indicates active memory address
1x
short
Display [4]
Apply value from memory address n
The measured value is available for use in all
functions.
Optional:
1x
>2 s
Display [10]
The value from the display [4] is saved to the buffer
and memory address 1.
The representation of a stored value corresponds to its origin. In the
case of functions and calculations, the corresponding units of
measurement and individual values are also displayed, e.g., in the
case of a surface area, these are two length values and one surface
area value.
Clear button
1x
short
The last operation is reset, for example an erro-
neous single value during the execution of a
