3
1
、
Safety warning information
◎
This product belongs to professional purposes and shall not apply to other.
◎
After receiving the equipment, please check whether the packaging is complete, And take
down the packing and check if it causes damage by the transport. If it happened to damage
owing to transport ,please do not use the equipment, and contact with local technical staffs or
manufacturers as soon as possible.
◎
The protection grade about product is IP20 and is suitable for indoor use only.
◎
The equipment should keep dry, avoid in damp, overheating, or used in dusty environment.
We need prevent the device from touching the water and other liquids.
◎
When we use the product,we should be paid attention to avoiding fire, heat, electric shocks,
ultraviolet radiation, light source explosion or loss caused by severe or fatal injury. Before
electrifying and installing, please read the instructions. Follow safety operation method and pay
attention to the description and the warning signs on the equipment.
◎
Please directly do not install this product on the flammable objects. Equipment need to keep
0.5 m minimum distance from fuel.
◎
For this product in normal work, the environment temperature is not more than 45
℃
. W hen
the temperature exceeds 45
℃
, please immediately stop using the equipment.
◎
When the equipment work reaches a steady state, the highest surface temperature is 150
℃
◎
Do not use this product which is directly projected on flammable objects. Please keep the
distance between the light and the light objects is more than 3 metres.
◎
When the light source is damaged,or is the thermal deformation,it should be replaced.
◎
Eyes can't envisage the luminary for long time.
◎
The equipment on the protection of the shell, lens and ultraviolet appear to a visible
damage, if adding to the degree of losing efficacy,such as cracks and gash,they should be
replaced.
◎
While changing any equipment components, accessories, please ensure that equipment is
disconnected with power to prevent electric shock from damaging.
◎
When unpacking or handling the equipment to prevent damage to the equipment, it must
be two people.
◎
Professionals only can install, operate and maintain,operating in strict accordance with the
operating instructions stated rules. The equipment should be installed in a well ventilated place,
keep the distance of wall above 50 centimeters, and check the fan and the vent which are
unimpeded.
◎
Before installation, please confirm that you can use the power supply voltage that is
consistent with the lamps that are identified.
