INSTALLATION GUIDE
KALE FANS
www.kalefans.net
2019
8
Main body
9
wiring
10
steel wire
11
power cable
12
Fan blades
13
Logo
Notice: keep the upper and under plane
horizontal, then tighten up the relevant bolts.
Notice: Don't cut the copper wire when stripping off, first connect ground wire
(yellow-green one or yellow one if no yellow-green), connect one-to-one according
to the color and then wrapped with insulating tape.
Notice: Four steel wires should be isometric, symmetrical, ensure all points bear stress
evenly, the steel wire clamps must be tightened up and glued, same with the
turnbuckles.
Notice: Wiring should be tight, firm and nice-looking.
Notice: Keeping the blade surface good and install diagonally, two people work
together will be the best so that can ensure the tightening effect.
-11-
