kala Arkane 1650, User Manual

Page: 14 / 22

14
6.4 Application and film installation
The table below showes the position of the media depending on the application
Cold lamination film
application Position 1 Position 2 Position 3 Position 4
Single side lamination with
waste paper Lamination
film Take up of the
protection liner Waste
paper
Single side lamination
directly on a print roll
installed on the machine for
a long run Lamination
film Take up of the
protection liner Print roll
Single side lamination with
double sided adhesive
simultaneously Lamination
film Take up of the
protection liner Double
sided
adhesive
Single side lamination with
double sided adhesive
using 2 protection paper Lamination
film Take up of the
protection liner Double
sided
adhesive Take up of the
double sided
adhesive
protection liner
Application tape Application
tape Application tape should be fed directly to the
roller without going under the separation bar
Lamination of boards,
application of colour vinyl
onto a board Lamination
film or vinyl Take up of the
protection liner
Encapsulation (both side
lamination) Upper
lamination
film Take up of the
upper film
protection liner Lower
lamination
film Take up of the
lower film
protection liner
1
2
3
4