9
•
Test leak tightness of the system by means of soapsuds or leakage
testing spray.
•
Check the protection system by activating the security; the appliance
should go out.
Assembly instruction electric wiring
This remote control is mains dependent. The receiver part has to be
connected to an earthed socket outlet 230 V wih correct phase/neutral
terminal! Insert the accompanying battery into the transmitter.
It is possible to connect an EXHAUSTO RSVG fan. For this purpose the
electrical layout has to be changed to the the plan in annex 2. An extra
wire is include for this purpose and has to be connected as below.
Step 1
Remove plug 1
Step 2
Insert the delivered plug onto
the cable tree
Step 3
Connect the other four
cables to the EFC 21/EFC
25.
10
ATTENTION: This receiver has tob e mounted outside of the
burner’s radiation area, because of the sensitiveness of the
lectronics to heat radiation !
The radiografic controller has a transmitter which gives of sound signals,
because of that the receiver may not be placed behind or in a sound-
proof room.
