KAKA Industrial TGK-08, Operation Manual, Page: 9 / 44

4. SET UP
4.1 Moving & placing base unit
Use a forklift and straps rated for the machine weight to lift the machine off the pallet and
onto a suitable location. Looking at the following drawing
：
A. Unclamping: turn the handle to this position,
the vise will open, please turn the handle to
Neutral position when vise arrive your expect
position.
B. Neutral position: when the vise arrive the
expect position, please turn handle to neutral
position.
C. Clamping:
turn the handle to this position, the
vise will go close to the workpiece, please turn
the handle to Neutral position when vise arrive
your expect position.
K
N
Blade speed switch: Usually we use two speeds
motor, so TGK-4220 has two blade speeds. You
can change blade speed by this switch.
For optional: we can supply servo motor, then you
can change blade speed variable. You can change
the blade speed by the speed rate dial on panel
Figure 3