Operation Manual
SBG-30
Model SBG-30
- 2 -
READ ALL INSTRUCTIONS
BEFORE USING THIS TOOL!
1.KEEP WORK AREA CLEAN. Cluttered
areas invite injuries.
2.OBSERVE WORK AREA CONDITIONS.
Do not use tools in damp, wet, or poorly
in locations. Don
’
t expose to rain. Keep
work areas well fit. Do not use electrically
powered equipment in the presence of
flammable gases or liquids.
3.KEEP CHILDREN AWAY. Children must
never be allowed in the work area. Don
’
t
let them handle the benders.
4.STORE IDLE EQUIPMENT. When not
in use, tools must be locked up in a dry
location without rust. Always lock up tools
and keep out or reach of children.
5.DO NOT FORCE THE BENDER. It will
do the job better and more safety at the
rate for which it was intended. Do not use
inappropriate attachments in an attempt
to exceed the tool
’
s capacities.
6.USE EYE, EAR AND BREATHING
PROTECTION.
Always
wear
ANSI
approved impact safety goggles.
7.DO NOT OVERREACH. Keep proper
footing and balance at all times.
8.MAINTAIN TOOLS WITH CARE. Keep
tools
clean
for
better
and
safer
performance. Keep handle dry, clean, and
free from oil and grease.
9.STAY ALERT. Watch what you are dong.
Do not operate any machinery when you
are tired.
10.CHECK
FOR
DAMAGED
PARTS.
Before using any tool, any part that
appears damaged should be carefully
checked to
determine that it would
operate properly and perform its intended
function. Check for alignment and binding
of moving parts, any broken parts or
mounting
fixtures,
and
any
other
condition that may affect proper operation.
Any part that is damaged should be
properly repaired or replaced by an
