- 3 -
10.
REPLACEMENT PARTS AND ACCESSORIES.
When servicing, use only identical
replacement parts. Only use accessories intended for use with this tool.
11.
DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
SPECIFICATIONS
The English Wheel with an optimal working depth for all sheet metals
-Deep throat of 710 mm for sheets over 1400mm
-LxWxH=960x870x1524mm, Weight: 75kg, incl. forming wheels.
-For steel sheets up to ca. 1.2mm, aluminium ca. 1.9mm, strengthening easily possible.
-Professional version with pressure control by foot, quick lever mechanism and sideways
adjustment of the lower forming rolls.
-Upper wheel now with round edges for a scratch free result made from new improved
specially hardened steel.
-Upper wheel now movable for optimum and easy adjustment!
- Industrial forming wheels made from tool quality steel (CNC finished, hardened and
perfectly polished) for professionals and the industry. Excellent for polishing aluminum etc.
ASSEMBLY AND OPERATION
Machine should be installed on a level surface, with proper lighting. Area around machine
should be clear of scraps, oil or dirt. Apply a suitable non-skid material to floor. Be sure to
keep hands clear of forming wheels when rotating crank handle.
1. The front leg 28# is fixed with back leg seat 22# through bolt 23#, and washers, and
the back leg 27# is connected with front leg and seat through connecting pipe 24#
and flat washer 26#,bolt 25#.
2. The upper frame 1# is fixed with leg support 28#, 27# through bolt 29#, washer 26#
and nut 30#.
3.The upper wheel bracket 3# is connected with upper wheel 5# through shaft pin 2# .
The bearing 6# is respectively put into the both side of curve of upper wheel 5# .
Then the upper wheel 5# and bracket 3# is fixed with upper frame 1# through bolt 9#
and washer 8#.
4. The bearings 6# which are put in the both ends of the wheel 10# (37# 38# 39# 40#
41#) are connected with shaft pin12# so as to process one set and a work piece.
Then you can put this set and work piece to the upper socket of 13#.