- 2 -
DESCRIPTION
English Wheel is hand operated and will form sheet metal up to 1.2mm thickness mile steel (or
equivalent). The English wheel is constructed of cast iron and steel ensuring minimum deflection
of the workpiece during forming operations.
SAVE THIS MANUAL
You will need this manual for the safety instructions, operating procedures. Maintenance
procedures, parts list, and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep both this manual and your invoice in a safe
dry place for future reference.
Check for shipping damage. If damage has occurred, a claim must be filed with carrier.
Check for completeness. Immediately report missing parts to dealer.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
SAFETY INSTRUCTION
1.
KEEP WORK AREA CLEAN.
Cluttered areas invite injuries.
2.
OBSERVE WORK AREA CONDITIONS.
Do not use tools in damp, wet, or poorly in
locations. Don’t expose to rain. Keep work areas well fit. Do not use electrically
powered equipment in the presence of flammable gases or liquids.
3.
KEEP CHILDREN AWAY.
Children must never be allowed in the work area. Don’t let
them handle the benders.
4.
STORE IDLE EQUIPMENT.
When not in use, tools must be locked up in a dry location
without rust. Always lock up tools and keep out or reach of children.
5.
DO NOT FORCE THE ROTARY MACHINE.
It will do the job better and more safety at
the rate for which it was intended.
6.
DO NOT OVERREACH.
Keep proper footing and balance at all times.
7.
MAINTAIN TOOLS WITH CARE.
Keep tools clean for better and safer performance.
Keep handle dry, clean, and free from oil and grease.
8.
STAY ALERT.
Watch what you are dong. Do not operate any machinery
when you
are tired.
9.
CHECK FOR DAMAGED PARTS.
Before using any tool, any part that appears
damaged should be carefully checked to determine that it would operate
properly and perform its intended function. Check for alignment and binding of
moving parts, any broken parts or mounting fixtures, and any other condition
that may affect proper operation. Any part that is damaged should be properly
repaired or replaced by an authorized service center unless otherwise indicated
elsewhere in the instruction manual.