Operation Manual
AP-3
KAKA
®
Industrial
- 5 -
damaged according to the parts list or
part figure.
2.1.2 This machine should be mounted
on hard ground or specific stand (not
supplied).
2.1.3 Please leave plenty room around
the machine for your easy operating, in
order to avoid injury.
2.1.4
Please
remove
the
anti-rust
grease on processing surfaces and
some parts included with kerosene.
2.2 Caution
2.2.1 Please read this manual before
operation
and
make
yourself
understand its structure and principle
completely.
2.2.2 Please don’t operate the material
of size exceed the table list max. range.
2.2.3 Keep proper footing and your
body
balance. Force should be applied swiftly
and steady.
2.2.4 Please don’t touch the blade
during operation.
3. Operation and maintenance
This machine is pre-adjusted before out
of factory. When you want to use, rotate
the handle (#13) to drive the blade (#6) to
move up and down though gear (#12).
Before your operation, you can adjust bolt
(#5) and nut (#6), to make the balance of
the blade (#6) suited for the work piece.
PARTS LIST
Part No.
Description
Part No.
Description
1
Body
8
Work table
2
Sleeve
9
Conical pin
3
Screw
10
Screw M8X25
4
Nut M10
11
Gear
5
Bolt M10x35
12
Handle
6
Blade
13
Sleeve
7
Cover
