Instructions for assembling the
KS-steering system Pro with KS-footrest
KS-steering system Pro with KS-footrest (code: 724210)
Part list:
1.
Rail (2 pcs)
2.
Plastic pedal (2 pcs)
3.
Wooden steering pedal (2 pcs)
4.
Rubber pivot Pro (2 pcs)
5.
Rail end (4 pcs)
6.
Foam washer (4 pcs)
7.
Screw (4 pcs)
8.
Fine adjustment piece(2 pcs)
9.
Fastener for footrest (optional)
10.
Pedal lock for footrest (2 pcs)
Assembling the pedal lock (part number 10) to the pedal (part number 2):
(a)
Slide the hinge mechanism plate of the
pedal inside the pedal lock part. Push it
further, so that the pedal lock can turn
over the pedal hinge mechanism (like
in picture [a] )
(b)
Pull the pedal lock backwards so that
the front end of the pedal lock will stay
on the track in the pedal. Pull it
backwards until the end of the inside hole in pedal lock faces the pedal front edge (like in
picture [b] )
(c)
Then move the back of the pedal lock within same level with the front end and push it in the
same track where the front end already is. (like in picture [c] )
