Full Digital Mechanical Sector Scanning Ultrasonic Diagnostic Instruments (Vet) User’s Manual V2.14
- 9 -
Chapter Six Functional Operation
6.1 Startup and Shutdown
In shutdown status, press
key, machine starts up, power indicator lights.
In startup status, press
key, machine shuts down, power indicator goes out. Please note that when
shut down the machine, the time of pressing key is a rather long than normal pressing key.
Note: When below 0
℃
, probe may turn abnormal after startup, later enter into normal state; Lower
temperature, the recovery time will be slightly extended.
6.2 Screen display reverse
Hold down freeze
key for some time to achieve the screen display reverse, to meet left/right hand use.
6.3 System Functions Setting
6.3.1 Time Setting
1.
Freeze image, press direction keys
to move cursor to “Preset”;
2.
Press direction keys
to enter setting interface;
3.
Press direction keys
to select “Minutes, Hours, Day, Month and Year”;
4.
When setting minutes, hours, day, month and year, press direction key
to increase value or press
direction key
to decrease value;
5.
Press
key to confirm this time setting and quit setting interface.
6.3.2 TV Mode Setting
1.
Freeze image, press direction keys
to move cursor to “Preset”;
2.
Press direction keys
to enter setting interface;
3.
Press direction keys
to move symbol “<” to point to “TV mode”;
4.
Press direction keys
to achieve TV mode conversion between PAL and NTSC;
5.
Press
key to quit setting interface.
6.3.3 Energy Saving Setting
1.
Freeze image, press direction keys
to move cursor to “Preset”;
2.
Press direction keys
to enter setting interface;
3.
Press direction keys
to move symbol “<” to point to “Sleep”;
4.
Press direction keys
to select energy saving time among 01~99 minutes or select “Off”;
5.
Press
key to quit setting interface.
6.3.4 Characters Brightness Setting
1.
Freeze image, press direction keys
to move cursor to “Preset”;
2.
Press direction keys
to enter setting interface;
3.
Press direction keys
to move symbol “<” to point to “Font Bright”;
4.
Press direction keys
to select characters brightness among 160, 192, 224 and 255;
5.
Press
key to quit setting interface.
6.3.5 Hospital Name Setting
1.
Freeze image, press direction keys
to move cursor to “Preset”;
2.
Press direction keys
to enter setting interface;
3.
Press direction keys
to move symbol “<” to point to “Hospital”;
4.
Press
key, the cursor is located above “EAR ID”; at the same time characters input menu will be
shown at the bottom of the screen:
