Full Digital Mechanical Sector Scanning Ultrasonic Diagnostic Instruments (Vet) User’s Manual V2.14
- 7 -
2. Remove the battery
According to the “OPEN” direction of the arrow, use the “Battery lock coin” to toggle “Battery cover
knob”, removed “Battery cover”, pull the ribbon and take out the battery.
Battery
Battery cover
Battery cover knob
5.4 Video glasses (Goggle06) installation
Turn off the system; connect the video signal line of video glasses to the “Video output interface” of
the main unit, and then connect the USB line of video glasses to the “USB interface” of the main unit.
5.5 Video recorder installation
1. Turn off the system, connect the equipotential terminal ( ) of the video recorder to the earthing;
2. Connect one end of the video connection line to the video recorder and the other end to the video
output interface on the left of main unit;
3. Insert one end of power plug (jack) of the video recorder to the power input socket of the video
recorder, the other end to the power supply socket.
5.6 Connect to power
1. Connect to the power adapter
Insert the output plug of adapter into DC power input interface.
2. Connect to the main power supply
Insert the power plug (jack) furnished with the machine into power input socket of the power adapter,
the other end to the mains socket-outlet. The instrument uses three-core power supply. It connects
with the protective earth line when power plug inserts into its socket.
5.7 Ultrasonic probe check before and after operation
Before and after ultrasonic diagnosis to check the probe or cable jacket whether has any abnormalities,
such as cracks, bulge or oil leakage, whether it be cleaned or disinfected.
5.8 Main unit check before and after operation
5.8.1 Inspection before start-up
Check the following items before starting the machine:
Warning:
1. Adapter has no switch. The isolation of the system with the MAINS used to unplug the
adapter as the intended isolation means.
2. The device should be used only with power adapter provided by Kaixin Company.
3. To avoid damaging power adapter or harming people by unexpected fallen, make sure the
power adapter is placed on the leveled desk.
4. The operator must not touch signal input/ signal output and patient simultaneously.
Ribbons is on the right
Finger upward direction
