13
6)
After the reading stabilizes, record the reading from
the screen. When measuring AC current, the frequency
is displayed at the same time.
7)
When the measurement is completed, disconnect
the test leads from the measured object.
WARNING
1. Pay special attention to safety when measuring
high voltage to prevent safety hazard.
2.Before use, test on known current to confirm
intact function.
Caution:
The measured current should not exceed the rated
maximum current of 600mA to prevent safety
hazard.
1)
Long press “ ” key to turn on the power. Press
“
” key to switch to “
” function. The meter
shows “NCV”.
2)
Detect objects with the top of the meter.
3)
If the meter senses weak AC voltage, the green
indicator light will be on. The buzzer will beep slowly,
displaying “--- L”.
4)
If the meter senses strong AC voltage, the red
indicator light will be on. The buzzer will beep fast,
displaying “--- H”.
Caution:
Please remove the probe while using NCV function
or the detection accuracy could be affected.
NCV function is affected by many factors, even if
there is no alarm prompt, there may still be high
voltage.
Non-Contact Voltage (NCV)