kaivac
cleaning
systems
TM
kaivac
cleaning
systems
TM
1-800-287-1136
Customer/Technical Support
P a g e ǀ
1 8
3.1 f
illing
t
he
u
nit
3.0 Operation
For all offerings that make use of the OmniFlex Trolley-Bucket (AutoVac, AutoVac Battery, Dispense-and-Vac,
Spray-and-Vac and SUV) there are multiple Fill Ports available to fill the Bucket with a hose or other source. The
Fill Port at the rear of the Trolley-Bucket is most convenient to access when using Chemical packets or Jugs.
Note the location of the Sight Gauge on the back of the Trolley-Bucket.
The Trolley-Bucket has a label with graduated markings. Gallon markings are displayed for 5 to 9 gallons.
For lesser quantity needs, the bottom of the label represents 4 gallons. For higher volume needs, the top of
the label represents 10 gallons. Filling over 10 gallons is not recommended.
Fill the tank with Kaivac or Kaivac approved Chemicals. Follow the proper
dilution instructions on bottles or dispenser. For accuracy and conve-
nience, use Kaivac proportioned chemical packets. Do not add chemical
to Trolley-Bucket if using Pump Box set-up.
TIP: IF A CHEMICAL IS BEING USED, USE ONLY THE RECOMMENDED DILUTION.
CAUTION: Before filling with solution, ensure the spigot is in the
“OFF” position.
*The UniVac offers dispensing without the use
of the Trolley Bucket. In this case, fill Vacuum
Tank with water/solution to prepare the unit.
>
>
>
Filling
Trolley
Filling
UniVac
Fill Port
(on both sides)
Fill Port
(on both sides)
Fill Port
Summary of Contents for OmniFlex TROLLEY BUCKET
Page 2: ...kaivac cleaning systems TM...
Page 32: ......
