www.kaivac.com
© 2006-2014 Kaivac, Inc. All Rights Reserved
Ph: 1-800-287-1136
Page 3-3
3.3 Preparing the OmniFlex Vacuum for Use
3.0 OMNIFLEX WET/DRY VACUUM SYSTEM
When finished vacuuming and with vacuum on, invert the Vacuum Wand
and tap in the middle to dislodge any matter or liquid. Then wrap the vac-
uum hose around the Vacuum Head.
Tap
Dumping:
To dump into toilet,
remove Vacuum Head and posi-
tion on rim as shown and lift.
Dumping:
To dump into the
drain, unscrew the Dump Hose
cap and lower the end of the
Dump Hose into the drain.
Maintenance:
The Float Cage of
the Vacuum Head needs to be
cleaned daily. Keep the Vacuum
Head oriented as shown and spray down
with hot water and allow to dry. Avoid
spraying water up into the Vacuum Mo-
tor compartment.
Maintenance:
Regularly clean
out the Vacuum Tank as shown
by tilting while dumping and
spraying
out con-
tents.
Dry Vacuuming:
remove the
Vacuum Head and slide the Dry
Vacuum Bag over the deflector
as shown. Make sure that the bag is
securely attached around the horn of
the deflector. Reattach the Vacuum
Head. When finished, remove the bag
and dispose.
Maintenance:
The Squeegee
Head Brush has Squeegee
Blades & Wheels need to be
replaced regularly every 2-3 months
depending on use. Remove screws as
shown to replace.
Wheel Re-
Squeegee
Blade Re-
Maintenance:
The Squeegee
Head Brush has Brushes that
wear and need to be replaced
regularly depending on use. Remove
screws as shown to replace.
Vacuum Brush Replace-
8
9
10
11
12
13
14
15
CAU-
TION:
Make
sure
straps
are se-
cured to
