Page 2-1
Remove vac wand sections from the
accessory box and attach together until
locking pin engages as shown
1
After removing machine from container, attach
the plastic elbow to the vac tank as shown
above
SMALL HOSE
Attach vac motor hose to barb and vac
motor inlet as shown above
Remove the tools and hoses from the
accessory box and place them in the
appropriate locations as shown above.
Place extra tools in tote bag and hang
bag over nose of machine.
2.1 OUT-OF-BOX SETUP INSTRUCTIONS
2.0 OPERATION
Remove the Vacuum Hoses from the Accessory Box. Assemble as shown.
Attach to Vac Tank
3
2
4
5
T: 0121 351 4444 E: [email protected] W: www. rawlins.co.uk
