Ⓐ
1
Ⓑ
Ⓒ
Ⓓ
3
2
4
Kaiser
LED Surface Lighting Unit
RB 5270 DX (5278)
for Copylizer exe.cutive LED (5215) and
exe.cutive LED Illumina Base Plate (5244)
DC 12V
1.
Safety Precautions
⚠
Please observe the following safety precautions
as they are meant for the safe and proper use of
the product to reduce the risk of accidents.
Do not use any accessories that are not specified
in this document.
Make sure that the products are not covered du-
ring operation.
The products are for indoor use only; keep them
in a dry environment.
Make sure that both water and flammable substan-
ces and liquids are kept away from the products.
Disconnect the products from mains when not in
use, during cleaning and maintenance.
Clean the products with a soft, dry cloth. On no
account use petrol or other cleaning agents and
solvents.
Place the products out of the reach of children.
Do not use the products if there are signs of any
damage to the housing, plug or cable.
Do not open the housings of the products.
Repairs must be carried out by qualified persons
only.
2. Assembly
Assemble the unit as shown on the pictures.
Plug the connecting cables in the sockets (5) and
connect the lighting units to the mains (see sheet
„Connection diagram“).
Use the cable holders (1) to attach the connec-
ting cables to the holding rods.
3. Switching On/Off, Adjusting Brightness
Turn the respective control dial (7) to switch each
light on or off and to adjust the brightness.
If you want to adjust the brightness of both lights
with one of these control dials (7), connect the
lights with the cable (6) included. Now you can
choose one of the control dials to adjust the
brightness of both lights synchronously.
Note: If one of the lights is switched off in syn-
chronous mode, the other light must also be
switched off first before returning to synchro-
nous mode.
4. Adjustments
(see fig.
Ⓑ
–
Ⓓ
)
To adjust the lighting unit, release the respective
locking screw (2), (3) or (4) and tighten it again.
5. Specifications
LED arrays:
2 x 161 SMD LEDs
Color temperature:
approx. 6000 K
Color rendition index: CRI > 93
LED angle of radiation: 110°
Operating voltage:
12 V
Power consumption: 2 x 27 W
Mains adapter:
input 100 - 240 V
Right reserved to make techni-
cal modifications.
Disposal Instructions
Dispose an unserviceable product in accordance of the relevant
statutory regulations.
This product is marketed for the purpose of illumination for image capture.
It is not intended for use in other applications.
Ⓔ
Ⓕ
ON
OFF
7
5
Receptacle
for connec-
ting cable
6
Printed in Germany 0622 000527800900
Kaiser Fototechnik GmbH & Co. KG
Im Krötenteich 2 · 74722 Buchen · Germany
T49(0)6281 407-0 · Fax +49(0)6281 407-55
www.kaiser-fototechnik.de · [email protected]
