Kaiser Baas X1, User Manual

Page: 9 / 13

15 16
Sharpness
To adjust the sharpness of the image.
White Balance
The factory default is Auto. If you switch
Auto OFF, remember to adjust when
lighting conditions change.
Colour
To adjust the capture colour settings.
ISO
This is the measurement of how sensitive
a camera sensor is to light.
We recommend you use the auto feature
until you’re more familiar with ISO settings.
Exposure
This allows you to set the light exposure
value.
Photo Preview
To enable a quick preview of 2 secs and 5
secs after the photo has been captured.
Language
To set the device language.
Beep Sound
Turn the key tone ON or OFF.
TV Standard
To set the TV Standard NTSC/PAL.
TV Out
To connect to TV via HDMI.
Screensaver
This will set the screensaver to come on
after 1 minute, 3 minutes or 5 minutes.
Note: You will need a Micro HDMI to
HDMI cable. You may also need to
check the TV Standard and set it on
the camera as appropriate.
Light Frequency
Selecting the correct light frequency will
avoid the possibility of strobing. Strobing
is the flickering effect on screen when
recording light or other elements. If this
occurs, try switching to a different light
frequency setting.
Screen Rotation
Rotate the screen.
Format SD Card
This will format the Micro SD card and
permanently erase all data on the card.
Use wisely.
Default Setting
This will reset the X1 to factory settings.
Connecting to a TV
You can mirror the X1 screen to a
compatible TV screen.
1. Connect the Micro HDMI cable-end to
the port on the X1 and the HDMI end to
HDMI port on the TV.
2. Go to the Setup on X1 and then go to
TV Out Settings.
3. Select On and press the Record button
to confirm selection.
4. Ensure the right HDMI source is
selected on the TV.