Kaiser Baas X1, User Manual

Page: 8 / 13

13 14
Loop Record
This allows you to set the recording mode:
Note: If Video Looping is OFF, the X1 will
stop recording when the SD card is full. If
the Loop mode is ON, the X1 will continue
recording over the previous files when the
SD card is full.
Motion Detection
To start auto recording when the camera
detects a motion.
Microphone
Select On to record audio, Select Off for
video only.
Auto Shooting
Select the time interval to set the camera
for Auto Image Capture.
Date Stamp
Off: Turn off the date stamp display on
footage.
On: Display date on footage.
On screen Display
To display information such as Recording
Duration, Battery Status, Resolution, Date
etc.
Date/Time
To set the system date and time.
Auto Power Off
This will set the X1 to automatically
power off after 3 minutes, 5 minutes or 10
minutes. Select OFF to keep the X1 on
during periods of inactivity.
HDR
High Dynamic Range.
Time-lapse
Time-lapse is a creative technique that
records footage at a very low frame rate.
Playing it back at a higher frame rate
shows a rapid change over time. This
technique is most effective when recording
scenes or objects which have a slow
state of change, e.g. a sunset or a flower
blossoming.
To record Time-lapse video, Select the
time interval from the list, press
Record
button to confirm selection.
1 Sec - Captures a frame every second
3 Sec - Captures a frame every 3 seconds
5 Sec - Captures a frame every 5 seconds
10 Sec - Captures a frame every 10
seconds
20 Sec - Captures a frame every 20
seconds
30 Sec - Captures a frame every 30
seconds
1 minute - Captures a frame every 60
seconds
Press
M button twice to go back to the
Capture screen.
Go to
Video Mode if you are not in the
Video Mode. You will notice letter
T at
the top left corner which indicates the
Time-lapse mode is active.
Press Record button to start recording.
Note: During the recording of Time-
lapse video, the timer only counts
the length of video footage recorded
based on the time interval. To switch
to normal Video Record mode, go to
the Time-lapse menu and select off.