18
EN
INSPECTION, MAINTENANCE AND STORAGE - KEEPING YOUR
REVO GLIDER IN GOOD NICK
We highly recommend that you routinely inspect and maintain your Revo Glider, as you would a bike,
board or car. If you discover abnormalities or have any issues with your Revo Glider, please contact
Kaiser Baas immediately for advice.
INSPECTION AND MAINTENANCE
Check the body and tyres of your Revo Glider for damage or excessive wear.
Avoid using harsh chemicals or solvents if you wish to clean and wipe down your Revo Glider. Do not
allow any liquids to enter the ports or buttons of the Revo Glider.
The Revo Glider is IP 54 rated, meaning that it can withstand small splashes of water. It is NOT water-
resistant or waterproof and must not be operated or stored in waterlogged conditions. Water and
other liquids can cause permanent damage to the circuitry and electronic components inside the Revo
Glider.
STORAGE
Store your Revo Glider indoors, in dry conditions at a suitable temperature.
If the ambient temperature of the storage location is below 0°C/32°F degrees or above 55°C/131°F
degrees, please select an alternative storage location.
To prevent dust and particles entering your Revo Glider during storage, please seal it inside its original
packaging and add additional layers of protection where desired.
If storing your Revo Glider for extended periods of time, please note that the charge level of the Revo
Glider may be depleted during storage. We recommend re-charging your stored Revo Glider every 3
months to make sure it is ready to ride when it is brought out of storage.
Summary of Contents for Revo
Page 1: ...USER GUIDE REVO GLIDER ...
Page 22: ...www kaiserbaas com ...
