- 6 -
Detach test leads from the measuring circuit and the input terminals when changing the
measurement function or removing the top case for fuse replacement.
WARNING 8. Test Lead Detachment
WARNING
CAUTION
WARNING 7. Maximum Input Observance
WARNING 6. Correct Function Settings
Children and the persons who do not have enough knowledge about
electric measurements must not use this instrument.
Do not measure the electricity in naked of barefooted to protect yourself
from electrical shock hazard.
Be careful not to get hurt with the sharp test lead pins.
Keep away the instrument from hot and humid conditions like in the car.
Do not apply hard mechanical shock or vibration.
Do not polish the case or attempt to clean it with any cleaning fluid like
gasoline or benzine. If necessary, use silicon oil or antistatic fluid.
WARNING 1.
WARNING 2.
WARNING 3.
CAUTION 1.
CAUTION 2.
3-3. General Warnings and Cautions
Do not measure any elements that might exceed the specified maximum input values of each
measurement ranges.
Always confirm that the correct measurement function is selected. Do not measure any voltage
except in the Voltage (V) function.
3-2. AC Adapter
Do not place high frequency welding machine or equivalent near the power source. The noise
might affect the instrument and would cause the mechanical error.
Read the following precautions carefully to prevent electric shock, fire accident, or damage to
the instrument
●
Be sure to use with the specified power supply voltage.
●
Insert the power plug and the connector fully into the each sockets.
●
Do not pull the power cord when removing the power plug from the socket.
●
Always keep the power plug and connector clean.
●
Do not insert and remove the power plug and the connector with the wet hand.
●
Do not damage, bend hardly, pinch, compress, or modify the power cord.
●
Do not apply mechanical shock to the adapter part. Do not drop it off.
●
Do not use the power cord that has any damage or melted coating.
