Kairos Autonomi
498 W. 8360 S.
Sandy, Utah 84070
801-255-2950 (office)
801-907-7870 (fax)
www.kairosautonomi.com
BULLETIN
BUL-062
Company Confidential
© 2014, Kairos Autonomi®
Scalable Autonomy™
Pronto4 Mounting Feet
MLT Field Installation
v.01.00.01
Page 4 of 6
2014-06-03 / 16:41
Pronto4 Mounting Feet MLT
Field Installation 01_00_01.doc
c. Remove the backing from a rubber bumper and securely insert it into the
foot’s cavity.
d. Repeat 5.a. through 5.c. with each foot.
6. Re-attach the servo and multifunction modules,
as follows
:
WARNING
Using the notes and photographs taken in step 1, ensure each module is placed into the
correct bay. Failure to do so will result in unpredictable behavior and may cause
system damage.
WARNING
If the module connector and interior frame connector are not adequately aligned then
damage can be done to the connector pins. If damage is done to the pins then the
module will not function correctly and will need to be returned to Kairos for repair.
a. Manually slide the module through
the exterior frame slot from which it
was removed during step 2.b.
b. Visually align the module connector
with the interior frame connector.
