support 2 devices.
It will send “NOTIFICATION_REPORT”to the device in Lifeline group when the door sensor is opened / closed,
tamper switch is triggered / recovered.
When in low battery status, door sensor will send “BATTERY_REPORT” to Lifeline group device periodically.
The door sensor will send “DEVICE_RESET_LOCALLY_NOTIFICATION” to Lifeline group device when the
device recovers to factory settings.
When the door sensor is opened, it will send “BASIC SET” command to control these devices in Group2.
3. Restore Factory Settings
Press the anti-tamper switch for 6 times within 2.5 seconds to restore factory settings.
4.
Wake-up
a) Manual Wake-up
Quickly press tamper switch once, the door sensor will automatically send wake-up information, and there will be
10s after wake-up to receive gateway setting information.
b) Automatic Wake-up
Default time of automatic wake-up is 24 hours, and there will be 10s after wake-up to receive gateway setting
information, the max automatic report time = 24 hours, minimum=30min
5. Lifeline Group
a)When the door sensor is opened or recovered, it will send “Binary Sensor Report” and “Notification Report”
commands to the device under Lifeline group.
When door sensor is opened:
Sensor Binary Report, Value = 0xFF, Type = 0x0C
Notification Report, Notification Type = 0x07, Event = 0x08
When door sensor is recovered:
Sensor Binary Report, Value = 0x00,Type = 0x0C
Notification Report, Notification Type = 0x07, Event = 0x00
b)When tamper switch is triggered or recovered, the door sensor will send “Sensor Binary Report” and
“Notification Report” command to the device under Lifeline group.
Tamper Triggered:
Sensor Binary Report, Value = 0xFF,Type = 0x08
Notification Report, Notification Type = 0x07, Event = 0x00
Tamper recover (press tamper switch for 0.5s):
Sensor Binary Report, Value = 0x00, Type = 0x08
Notification Report, Notification Type = 0x07, Event = 0x00
c) Low Battery Report: Battery Report
When the door sensor is wake-up from sleep mode, it will check its battery status; once low battery, it will send
Battery Report command to the device under Lifeline group every hour;
Battery Report, Battery Level = 0xFF
6. Association Group2