3
、
Matters needing attention
1
、
Before use, please make sure to wire correctly according to the system connection diagram,
and then connect the main power
；
2
、
Children, the elderly and people with disabilities, please use under supervision;
3
、
Do not plug or unplug any cables while the power is on, it may cause malfunction of the
operation function. If this happens, you can cut off the main power, and then reconnect it
after about 30s to recover;
4
、
Before using for the first time, you should pair the wireless hand controller with the control
box. The specific method is as follows
：
1
）
Press the pairing button on the control box and hold 3S
，
The indicator light is flashing
quickly, release the button;
2
）
Press any key on the hand controller within 10s, the control box indicator light stops
flashing
，
The pairing is successful, and the control box indicator is always on
；
If no key is pressed within 10s, the control box indicator stops flashing,
The original paired hand controller is not cleared, and the control box indicator light is
always on;
3
）
After the pairing is successful, press the button to start the corresponding function.
5
、
The control box can be paired with two hand controllers. If paired with a third, the first will
be cleared.
6
、
It is not recommended to operate multiple faders at the same time, except for special
functions;
7
、
Please replace the battery of the controller in time. When not in use for a long time, remove
the battery.
4
、
Key function description
1
、
Hand control panel diagram
2
/
3
