
notice
notice
Dynamic System
High-speed rotating propellers and motors may cause injury or loss to people. The following items
must be observed:
Propeller
1) Be sure to check the propellers before each flight.
2) Ensure that the propeller is operated when power supply of the aircraft remains closed.
3) Because the blade is thinner, please operate carefully during installation .
4) Use auxiliary tools when necessary to install and disassemble propellers.
5) Before each flight, please check whether the propeller is installed correctly and tightly.
6) Do not close to the rotating propeller and motor to avoid cutting.
Electric machinery
1) Ensure that the motor is firmly installed and can rotate freely.
2) Do not modify the physical structure of the motor by yourself.
3) Do not touch the motor directly with your hands immediately after the motor stops turning,
otherwise it may cause scald.
In order to avoid possible injuries and losses, the following must be observed:
1) Do not block the motor vent.
2)
Do not block the ventilation holes on the aircraft housing.
Electric machinery
1) Ensure that there is no foreign body in the motor.
2) If the motor can not rotate freely, please immediately perform the locking and breaking action to
stop the motor rotation.
Battery
The temperature of the power battery is high after use. Please do not touch the battery with your
hand immediately after landing, otherwise it may cause burns.
Electric modulation
1) Ensure that when the power supply of the aircraft is turned on, the electrical modulation will
give a prompt sound.
Storage and Transportation
In order to avoid possible injuries and losses, the following must be observed:
1) Because wires and small parts may pose a danger to children, it is important to keep children
away from aircraft parts.
1) Store flying batteries in dry and ventilated places to reduce direct sunlight to prevent
overheating of batteries. If the battery needs to be stored for more than a month, please balance
the single-chip voltage at 3.85V.Battery is 4S battery of 15.4v. You can plug the battery into the
charger to check the voltage. The recommended storage temperature range is 22 to 28 degrees
Celsius. Do not store batteries in places below - 20 degrees Celsius or above 45 degrees Celsius.
Transport them remotely in the original package as far as possible.
5
attention
warning
!
warning
!
Summary of Contents for KYZ2-2
Page 1: ...KAI YIN Z2 2 User s Manual Kai yingZ2 2 Disclaimer and Safety Operational Guidelines...
Page 11: ...10...
Page 12: ...11...