background image

www.kahnclimatecontrol.co.uk

 Thank’s for choosing Kahn. Please read this user handbook carefully prior to 

Incorrect use may cause fire, electric shock and the unit falling may result in 

injury or leakage. Contact our designated Kahn service centre on 0333 222 4016 

specialists. The manufacturer shall not assume responsibility for accidents or injury 

caused by incorrect use.

 

This product must not be disposed together with the domestic waste. 

This product has to be disposed at an authorised place for recycling 

of electrical and electronic appliances.

Kahn Climate Control 

LITTLE BOY 

user handbook

installing and keep it for further reference.

 Thank’s for choosing Kahn. Please read this user handbook carefully prior to 

Incorrect use may cause fire, electric shock and the unit falling may result in 

injury or leakage. Contact our designated Kahn service centre on 0333 222 4016 

specialists. The manufacturer shall not assume responsibility for accidents or injury 

caused by incorrect use.

 

This product must not be disposed together with the domestic waste. 

This product has to be disposed at an authorised place for recycling 

of electrical and electronic appliances.

Kahn Climate Control 

ATOM 

user handbook

installing and keep it for further reference.

Summary of Contents for Little boy









Reviews: