5
SETUP AND BASIC ASPECTS
1. BOOST/CUT GAIN CONTROL
Boost or cut the low frequency point
chosen.
2. LOW FREQ CONTROL
The low frequency points of the EQ in herzts.
3. MID CUT CONTROL
This control is linked to the Low Freq Control and
allows you to attenuate the mid linked frequency to each frecuencial point, and
this results of clean the up-mid range liken to the low one.
4. HIGH FREQ CONTROL
The low frequency points of the EQ in herzts.
5. BOOST/CUT GAIN CONTROL
Boost or cut the high frequency point
chosen.
6. IRON BYPASS
Output transfomer bypass switch.
This ouptut transformer is
part of this classic midrange sound, when you bypass it you have smooth more
dynamic sound, so you have a new sound option. When the Led is on, the
transformer is out of the signalpath.
7. IN CONTROL
Bypass the EQ when the led is off.
8. BLEND CONTROL
The Dry/Wet blend control determines the balance
between the original and the processed signal. The range is from 0% (dry,
unprocessed) to 100% (wet, processed signal only). And it is located in the
signal path after the drive and output control.
9. ON/OFF
Power on/of switch.
2
3
5
1
6
9
4
7 8
Summary of Contents for PBX-1
Page 9: ...9 RECALL SHEET...
