2. Remove both bolts
3
.
3. Draw off the eye
1
from the towbar
6
.
Fitting the ball coupling
Precondition The towing eye has been removed.
The assembly condition as shown in the centre graphic in 13 has been achieved.
The ball coupling is complete with sleeve.
1. Push back the protective sleeve
8
if necessary.
2. Bring the bush
4
of the overrun damper
5
to the fixing position so holes align.
■ Push a metal rod through the towbar
6
and bush
4
to align the holes.
■ Withdraw the rod.
3. Press the saddle
7
down over the towbar
6
.
4. Push the ball coupling
9
on to the towbar
6
.
5. Align the holes for the fixing bolts
3
.
6. Use a metal rod if necessary to align the holes.
7. Push the fixing bolts
3
through the holes in the coupling
9
, the saddle
7
, and the towbar
6
.
8. Screw on and tighten the self-locking nuts
2
.
6
Installation
6.3
Adjusting the chassis
46
Service Manual Screw Compressor
M43
No.: 9_9432 02 E
RAMIRENT
