3.4 User's responsibilities
3.4.1 To be noted when integrating in a machine
The block will become an integral part of the machine into which it is built. Therefore, it is the re‐
sponsibility of the machine manufacturer to ensure that the block is suitable for the application and
that the necessary conditions for its safe and reliable operation are maintained.
➤ Check the suitability of the block and the conditions under which it will operate.
3.4.2 Observe statutory and universally accepted regulations
This includes, for example, nationally implemented European directives and/or applicable national
legislation, safety and accident prevention regulations.
➤ Observe the statutory and universally accepted regulations when operating the blower block.
3.4.3 Determining personnel
Suitable personnel are experts who, by virtue of their training, knowledge and experience as well
as their knowledge of relevant regulations can assess the work to be done and recognize the pos‐
sible dangers involved.
Authorised assembly personnel possess the following qualifications:
■ are of legal age,
■ have read, understood and will abide by the safety instructions and operating manual,
■ must be fully conversant with the safety concepts and regulations of drive, vacuum and com‐
pressed air technology,
■ are able to recognise the possible dangers of drive, compressed air and vacuum technology
and take appropriate measures to safeguard persons and property,
■ have received adequate training and authorization for safe assembly.
➤ Ensure that personnel entrusted with assembly are qualified and authorised to carry out their
tasks.
3.5 Dangers
Basic instructions
Information concerning the various forms of danger that can arise during block operation are found
here.
Basic safety instructions are found in this service manual at the beginning of each chapter in the
section entitled 'Safety'.
Warning instructions are found before a potentially dangerous task.
3.5.1 Safely dealing with sources of danger
Information concerning the various forms of danger that can arise during the operation of the blow‐
er block are found here.
3
Safety and Responsibility
3.4
User's responsibilities
10
Assembly and operating manual Blower block
OMEGA 4 B
Number: 9_9533 23 E
