KAESER KOMPRESSOREN EPC 150-2-G Page 58 Assembly And Operating Manual Download

Page: 58 / 100

6.10.2.2 EPC 420–2–G / EPC 550–2–G

Material Supplied additional components for air filter

Modifying the air filter

Fig. 22 Modifying the air filter, EPC 420–2–G / EPC 550–2–G

Air filter

Angle

Before modification

After modification

1. Unscrew the air filter from the cylinder head and clean, if necessary.
2. Screw the supplied elbow into the cylinder head and then the air filter to the elbow.

Further information See chapter 10.4 for information on air filter maintenance.

Fitting the sound enclosure

Precondition The air filter is modified,

the rubber pads are removed.

Installation

6.10 Retrofitting the sound enclosure (accessory)

Assembly and operating manual 2-stage piston compressor
EPC-2-G

No.: 9_5753 24 E

Summary of Contents for EPC 150-2-G





































































































Search results

Summary of Contents for EPC 150-2-G

Reviews:

Related manuals for EPC 150-2-G

Brands by name

Popular brands

KAESER KOMPRESSOREN EPC 150-2-G, Assembly And Operating Manual

Search results

Summary of Contents for EPC 150-2-G

Reviews:

Related manuals for EPC 150-2-G

Brands by name

Popular brands