Fig. 25 Installing the sound enclosure, EPC 750-2–G / EPC 1000-2–G
1
Rubber pad
2
Rubber pad
3
Rubber pad
4
Z-profile
5
Bracket
6
Spacer
7
Base plate
8
Compressor block
9
Serrated locknut
10
Sheet metal collar
11
Compressed air cooler
12
Pre-cut foam
13
User's check valve
14
Hose line
15
Sound enclosure
16
Air inlet louver
17
Removable panel
18
Snap fastener
1. Place the Z-profiles on the brackets, insert the rubber pads
1
through the brackets and Z-pro‐
files and secure with serrated locknuts.
2. Insert the rubber pads
2
and machine mounts through the Z-profile and secure with serrated
locknuts.
3. Position the base plate and secure with hex-head screws to the rubber pads
2
.
4. Place the spacers
6
in the holes in the base plate.
5. Place the compressor block on the base plate and use the hex-head screws to screw through
the spacers to the rubber pads
3
.
6. Fix the sheet metal collar to the air cooler with the fixings provided and slide the pre-cut foam
over the collar.
7. Lead the motor cable and hose line through the holes provided and connect up.
6
Installation
6.10 Retrofitting the sound enclosure (accessory)
No.: 9_5753 24 E
Assembly and operating manual 2-stage piston compressor
EPC-2-G
51
