4. Connect the sensors for the defined signals to the logger.
The allocation of the analog connections on this screen shows that the connection has been
establish (green checkmark) in Channel 1, and that the connections at the channels 2 to 4
have not yet been established or were made incorrectly (red "X").
If you place a checkmark in column
< Plot >, the system also creates a graph for the meas‐
urement data from the corresponding signal.
By scrolling down, you can display the entire graph.
Fig. 25 Allocation of channels (analog inputs) with plot
5. Click the
< Measurement > tab at the left screen margin to initiate a measurement.
5.1.5 Starting, performing and concluding a measurement
If the overload monitoring responds, you may perform a RESET (see Section 5.1.7).
Fig. 26 Starting a measurement
1. Click
< Start measurement >.
5
Operation
5.1
Example of a measurement with ADA 2
24
Operating manual measuring and analysis system
ADA 2 EFFICIENCY OPTIMIZATION
No.: 901711 00 E
