7. Complete the fields in the screen as much as possible.
If you click
< OK > without having completed all mandatory fields, the system highlights the
fields still to be completed in orange. They must be completed.
As an alternative to the manual data entry, you can also click "KESS-DB" and load the data
from the KESS database, if the data for the components of your particular configuration are
stored in the database.
8. Click the
< Signals > tab and select in the next screen the signals whose values are to be cap‐
tured and evaluated during this measurement for "Compressor 1" (selected in our example:
“Discharge Pressure” and “Dewpoint”).
Fig. 16 Signal selection for "Compressor 1"
9. Confirm with
< OK >.
The system returns to the screen displaying the measurement configuration.
10. Click the symbol for "Compressor 2" in order to enter the data for this component.
Fig. 17 Data selection for "Compressor 2"
5
Operation
5.1
Example of a measurement with ADA 2
No.: 901711 00 E
Operating manual measuring and analysis system
ADA 2 EFFICIENCY OPTIMIZATION
19
